|
Post by iampew on Dec 22, 2009 20:42:57 GMT
Taken from: forums.steampowered.com/forums/showthread.php?p=123733051. Click on "Start", then select "Run", type "cmd" and press Enter or click "Ok". This will bring up a command prompt. 2. Type "telnet speedtouch", or if that doesn't work then type "telnet 192.168.1.254". 3. You will be prompted to login to the modem with a username/password. The default is one of the following: Username: Administrator Password: None (leave this field blank)OR:Username: admin Password: adminIf neither of those combinations work, please contact your Internet Service Provider for assistance. 4. Once you have logged in, you will be presented with the command line of your modem. This is where you must enter the following commands: o Type connection bindlist and press enter. This will list connection bindings. o Look for a line that contains "GAME" and some port numbers. For example: GAME(UDP) udp 27010-27011 o Enter the command: connection unbind application=GAME(UDP) port=27***-27*** and press enter. The port numbers in this command must match the numbers that are listed in your GAME port listing, similar to the example above. 5. When finished, close the command line and launch Steam. Try joining the game server and see if it works correctly. If it does not, please contact your router manufacturer or Internet Service Provider for assistance.
|
|